740 L4-2.3L SOHC VIN 88 B230F (1985)
beige
1374655-7
1374787-8
Knee bolster member
(SRS)
1371862-2
3519375-4
Soundproofing panel, driver's side (cars without SRS)
grey
1376049-1
1374788-6
blue
1376303-2
1374789-4
beige
1376304-0
1374790-2
Soundproofing panel, driver's side (cars with SRS)
1371928-1
No Change
Modification of knee bolster member
Grind off the four welded nuts on the member.
Also grind off the spot weld on the reinforcing bracket and remove the bracket.
NOTE:
Before replacing the member, check that the heater hose air nozzle is inserted in opening A as illustrated.
Attach the member to the instrument panel using a 6 mm screw at the top and two 6 mm screws at both the left and right-hand sides.
Tightening torque:
8 N-m (6 ft.lb.)
NOTE:
The original screws may be reused.