volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Customer Interest for Spoilers, Flaps, and Air Dams: > < Cooling System - Temperature Gauge Reads High|Page 4793
Page 3
background image

switch in the lower radiator hose.

^

Thermostat

In order to increase the difference between the normal operating temperature of the engine and the engagement temperature for the 91~C electrical
cooling fan switch to avoid unneccessary engagement of the electrical cooling fan, a 87~C (189~F) thermostat should be installed after installation of
the 91~C (196~F) electrical cooling fan switch. The thermostat kit is available under P/N 273459-8.

^

Expansion Tank Pressure Cap

For an increased safety margin before boiling and loss of coolant, a 150 kpa (21.8 PSI) pressure cap, grey, should be installed, P/N 1357390-2.

NOTE:

Ensure all hose clamps for the cooling system are tight and hoses are free of wear or damage.

Claims may be submitted under the new car warranty

1.

Inspection Operation Number: 260033 Time Allowance = 0.3h

2.

Upgrading Operation Number:   260043 Time Allowance = 1.5h

Including time allowance for inspection.

Customer Interest for Spoilers, Flaps, and Air Dams: > < Cooling System - Temperature Gauge Reads High|Page 4793