volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Customer Interest for Coolant Pump: > < Cooling System - Checking Excessive Coolant Loss|Page 1565
Page 3
background image

Reconnect return pipe

Fit a new rubber seal.

Fit upper timing gear cover

1.

M6 bolts

2.

M8 bolt

3.

panel screw

Reinstall:

-

water pump pulley

-

drive belt (loosely)

-

lower radiator hose

-

fan shroud

-

preheating hose clamp

-

fan.

Tighten drive belts

It should be possible to depress belt 5-10 mm (3/16 - 3/8 in.) with thumb when correctly tightened.

Reconnect battery

Fill with Volvo Type C coolant mixed 50/50 with clean water.

Tighten drain tap.

Fill expansion tank to max.

Warm-up engine (make sure that heater control is set to max heat). Check for leaks. Top-up coolant as required.

Reconnect vacuum hose to water valve.

Refit original expansion tank cap.

Warranty Information

During New Car Warranty, claims must be submitted under:

Operation No.

Labor Description

Time Allowance

260003

Cooling System Test

0.1 hr.

262102

Water Pump, remove/replace

1.1 hr.

Customer Interest for Coolant Pump: > < Cooling System - Checking Excessive Coolant Loss|Page 1565