volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 4980 > < Diagram Information and Instructions|Page 4978
Page 1
background image

Maintenance Required Lamp/Indicator: Service and Repair

Fig. 210 REPLACE LAMBDA SOND (OXYGEN SENSOR)

- Oxygen sensor (one-wire type only) must be replaced every 30,000 miles.

Fig. 150 LAMBDA SOND

- To replace the Oxygen sensor, apply some "Never-Seize" Volvo part number 1161035-9 or equivalent to the threads of the new sensor. Make sure that

no paste enters into the slots on the tip, this will render the Oxygen sensor ineffective. Torque the sensor to 55Nm (40ft.lbs).

Fig. 182 REMINDER LIGHT

- An indicator light on the instrument panel is activated at 30,000 mile intervals. When the light is activated, Oxygen sensor should be replaced.

Diagram Information and Instructions|Page 4980 > < Diagram Information and Instructions|Page 4978