760 L4-2320cc 2.3L SOHC Turbo B23FT (1984)
-
Pass the leaded wire through the lock on the connector and catch on the sensor. See illustration.
-
Thread on a new lead weight and press together with pliers.
-
Fit the new leaded box and attach lid firmly.
-
Test.
Speedometer sensor, replacement .................................................................................................................................................................................. T2
760/780 1988-, Multi-link back axle
960
The sensors are placed differently for varying versions of differential.
-
Remove casing over fuel filler pipe or the cover on the left hand side behind the wheel arch.
-
Break open the leaded box and unplug connector. Remove lead to sensor, rubber sleeve, and clamps.
-
Clean the area around sensor and unscrew it.
-
Reassemble in reverse order.
Oil new 0-ring before fitting.
When fitting sensor, tighten to torque: 8 - 12 Nm (5.9 - 8.9 ft lb).
-
Fit new leaded box and put on lid firmly, as illustrated.
-
Test.