volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Air Mass Meter - Fault Tracing|Page 2287 > < Air Mass Meter - Fault Tracing|Page 2285
Page 6
background image

Connector configuration as illustrated.

CAUTION: The two types of air mass meters described in this Service Bulletin are not interchangeable.

Check ground(s)

-

Connect an ohm-meter between terminal 36 and ground, and between terminal 6 and ground.

Meter should show less than 1 ohm resistance in both cases. Check wiring continuity if value is higher.

Check voltage supply

-

Turn ignition ON.

-

Connect a volt meter between terminal 9 and ground

Meter should show battery voltage. Check wiring and system relay if lower than battery voltage.

Check CO-adjustment screw

-

Turn ignition ON.

Air Mass Meter - Fault Tracing|Page 2287 > < Air Mass Meter - Fault Tracing|Page 2285