760 L6-2383cc 2.4L DSL Turbo D24T (1983)
Reinstall:
- seat cushion (ensuring upholstery rail is facing correctly)
- storage pocket at side of seat
Heating element in front seat cushion, replacement
Remove
- storage pocket
Removal
Remove upholstery rails and seat cushion.
High-output element
Disconnect single-pole connector (SB)
Disconnect three-pole connector arc push out black (SB) lead.
Normal-output element
Disconnect four-pole connector.
Push out round pins on seat cushion element leads.
Release clamps on either side
Pull off upholstery.
High-output element
Remove original heating element by releasing securing clamps.
Normal-output element
Cut leads as close as possible to element. Leave original element in position.
New element
Normal-output element
Cut leads as close as possible to connector.
Fit new pin, P/N 965824-6.
High-output element