760 L6-2383cc 2.4L DSL Turbo D24T (1983)
Remove gear belt
Slacken coolant pump mounting bolts and belt. Coolant may leak when bolts are slackened.
Lift off belt.
AT11
Remove coolant pump
Remove cover panel and retaining bolts for coolant pump.
Move panel to one side and remove pump. Take care not to crack panel.
AT12
Clean
Clean contact surface for pump on cylinder block. Dry off coolant from cylinder block, gear etc.
AT13
Installing
Install new coolant pump
Grease new 0-ring and place it on pump. Do not use permatex or other types of sealers.
Move cover plate to one side and mount pump on engine. Pump retaining bolts should only be attached loosely at this stage.
AT14
