volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Coolant Pump O-Ring - Replacing|Page 774 > < Coolant Pump O-Ring - Replacing|Page 772
Page 7
background image

Install:

front timing gear cover

cooling fan with spacer and pulley. Torque bolts to 9 Nm (7 ft lbs).

power steering pump + mounting bracket

belt for power steering pump and fan belts

radiator. Connect hoses (It should be possible to depress belt 5-10 mm = 0.2-0.4 in. in center of one runs)

splashguard

battery.

AT20

Filling cooling system

Disconnect upper hose from cold start device. Place drip pan beneath hose. Hold end of hose at approximately same level ax expansion tank. (By
following this method air locks in the cooling system will be avoided.)

AT21

Capacities:

Manual transmission:  .........................................................................................................................................................................  11.0 l (11.6 qts)
Manual transmission with tropic radiator:  .........................................................................................................................................  11.7 l (12.5 qts)
Automatic transmission:  ....................................................................................................................................................................  10.0 l (10.5 qts)
Automatic transmission with tropic radiator:  .....................................................................................................................................  11.6 l (12.6 qts)

Coolant Pump O-Ring - Replacing|Page 774 > < Coolant Pump O-Ring - Replacing|Page 772