760 L6-2383cc 2.4L DSL Turbo D24T (1983)
27 mm socket or wrench 5188.
Both cylinder 1 cams should point obliquely upwards.
Flywheel at 0 mark.
Lift off pump belt
Slacken mounting bolts for injection pump bracket to release belt tension. Tighten one bolt so that pump remains in upper position.
Lift off belt.
Remove camshaft rear sprocket
Hold sprocket in position with 5199 and unscrew nut with wrench 5201. Take care not to rotate camshaft.
Slacken camshaft front sprocket
Use 5199 to hold sprocket in position when loosening bolt. Make sure that camshaft does not rotate.
Tap sprocket to free it from camshaft.
