volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Ambient Temperature Sensor / Switch HVAC|Specifications|Page 2389 > < Ambient Temperature Sensor / Switch HVAC|Specifications|Page 2387
Page 2
background image

3. Remove connector from sensor and retaining screws.
4. Remove sensor.
5. Check Sensor

NOTE:  Sensor resistance drops with increasing temperature.

^  Ignition should be switched OFF. Use ohmmeter. Carry out measurement at room temperature approx. 2O-23 °C (68-73 °F)
^  Resistance: 30 - 40 Ohms
^  If resistance is much higher: 65 - 100 Ohms, replace sensor.

Installation:

Ambient Temperature Sensor / Switch HVAC|Specifications|Page 2389 > < Ambient Temperature Sensor / Switch HVAC|Specifications|Page 2387