760 L6-2383cc 2.4L DSL Turbo D24T (1983)
Installation:
1. Install sensor and tube.
2. Install connector.
3. Install glove box.
4. Install panel.
Temperature Sensor In The Control Panel, Checking/Replacement
Checking Temperature Sensor:
1. Remove cover panel and detach control panel from dashboard.
2. Disconnect connector from sensor.
3. Use voltmeter/ammeter 951 0061 to check temperature sensor.
4. Sensor should allow current to pass through only
at temperatures above 18 °C (64 °F).
5. Cool sensor down in a refrigerator, check that
sensor cuts off current at 18 °C (64 °F).
