760 L6-2383cc 2.4L DSL Turbo D24T (1983)
Speedometer Head: Service and Repair
Speedometer Sensor Replacement
Speedometer sensor, replacement ................................................................................................................................................................................. T1
Rigid back axle.
-
Cut and remove seal of lead.
-
Unplug connector.
-
Unscrew sensor.
-
Remove casing over fuel filler pipe on 4-door models, or the cover on the left hand side behind the wheel arch on 5-door models.
-
Break open the leaded box and unplug connector.
-
Remove the sensor lead, rubber sleeve, and clamps.
-
Clean the area around the sensor and unscrew it.
-
Replace sensor.
-
Fit new sensor.
-
Thread leaded wire through connector lid as illustrated.
-
Fit connector to sensor.