760 L6-2383cc 2.4L DSL Turbo D24T (1983)
Timing Belt: Adjustments
Basic setting of engine
Special tools: 5190, 5193, 5194, 5197, 5799, 5201
The following operations are described in this section:
-
setting camshaft position in relation to crankshaft
-
setting tension of drive belts (front and rear)
-
injection timing.
Engines should be basic-set if, by adjusting the pump, it is not possible to obtain the correct injection timing. (Camshaft setting may have changed.)
Remove:
-
Valve cover
-
timing gear covers (front and rear).
Turn engine until cyl. 1 is at TDC - injection
Always use the vibration damper center bolt to turn the engine.