760 L6-2383cc 2.4L DSL Turbo D24T (1983)
Control Module HVAC: Technical Service Bulletins
A/C - ACC Programmers
SECTION
GROUP
NO.
87
106
DATE October, 1983
RE:
760 A.C.C. Programmers
THIS SERVICE BULLETIN APPLIES TO THE U.S. AND CANADIAN MARKETS.
Under no circumstances should the factory adjusted calibration screw on 760 A.C.C. programmers be altered.
All programmers are factory calibrated and do not need to be altered.
If a problem is encountered with a programmer, it must be returned under warranty. Altering the calibration will not correct any malfunction.
Programmers which have been adjusted by dealers will not be accepted under warranty.