760 L6-2383cc 2.4L DSL Turbo D24T (1983)
Clutch Cable: Service and Repair
1. Disconnect return spring and loosen cable.
2. Disconnect cable from release fork, bell housing and clamp by fuel filter.
3. Remove panel under instrument panel.
4. Remove cable locking clip and rubber bushing from pedal.
5. Pull cable out from firewall.
6. Install new cable in reverse order. Be sure that rubber bushings at pedal and release fork are correctly installed.
7. Adjust clearance: 1-3 mm (0.04-0.12 in) between release fork and bearing.
