760 V6-2849cc 2.8L SOHC B28A (Can) (1984)
Install New Balance Screws
Screw P/N 269835-5 (2 pieces) O-ring P/N 947114-5 (2 pieces)
Basic Setting
Turn all balance screws to the bottom position (clockwise). Unscrew balance screws 2 and 3 the following amounts:
-
balance screw (2) 1 turn
-
balance screw (3) 5 turns
-
DO NOT TURN SCREW (1)
NOTE:
The balance screws on vehicles from late MY 1984 are pre-set in production to 1 and 5 turns respectively.
Check/Adjust Basic Idle Speed
Disconnect link rod from throttle pulley. Ensure that the pulley moves smoothly and does not bind.
Warm up engine to operating temperature with AC off.