760 V6-2849cc 2.8L SOHC B28A (Can) (1984)
^
Cut off welded engine mount brackets.
^
Grind welds flush.
CAUTION: DO NOT CUT OR GRIND INTO THE CROSSMEMBER
^
Place rubber cushions on crossmember.
^
Mark position of retaining bolts (2x per mount). Drill size 9.5 mm (3/8")
^
Remove rubber cushions.
CAUTION: HOLES MUST BE DRILLED, NOT BURNED
^
Remove grease and dirt from grounddown surfaces.
^
Apply primer (P/N 277918-9).
^
Allow to dry.
^
Apply rustproofing compound (P/N 282767-3).