780 V6-2849cc 2.8L SOHC B280F (1987)
Modification of rear door for installing central locking motor
B1
Drill two holes
Drill two 6 mm (15/64") diameter holes.
Exact positions of holes are indicated by punch marks. Note that holes should be drilled only at two uppermost marks.
Apply anti-rust treatment using primer (p/n 9139153- 2) and rustproofing (p/n 1161350-2).
WARRANTY STATEMENT:
Claims may be submitted under the New Car Limited Warranty when a manufacturing defect is present using claim type: 01.
Oper.No.
Labor Description
Time Allowance
831154
Modification of new door to fit
0.1 hr
earlier models