780 V6-2849cc 2.8L SOHC B280F (1987)
Remove:
-
washer
-
rubber dust seals
-
guide pin
-
sleeve from caliper
CLEANING AND INSPECTION
Clean caliper sleeve bore with solvent.
Check that caliper pistons move easily.
A new caliper should be fitted if:
-
the caliper sleeve bore is severely corroded and it is not possible to remove the rust by polishing.
-
the caliper pistons are seized.
Minor rust may be removed with a cylindrical wire brush.
Lubrication and Installation
Using the grease supplied in the repair kit, lubricate new replacement sleeve and caliper sleeve bore.
Install:
-
sleeve
-
two dust caps
-
two lock rings.