780 V6-2849cc 2.8L SOHC B280F (1987)
Install blower motor in fan housing and tighten 3 screws (arrows).
Connect connector to blower motor.
Note:
If suppressor harness is fitted between wiring harness and blower motor, the harness can be removed since the blower motor is now internally
suppressed.
Install:
-
control unit mounting bracket
-
control unit and connector
Reconnect battery.
Air leakage test
Run blower motor at high speed to blow out any loose remaining debris.
Feel for leakage around connector.
If required, seal with butyl tape.