780 V6-2849cc 2.8L SOHC B280F (1987)
14. Take paper template and original blower housing. Template is shown on illustration. Copy and cut out template. Attach template to blower housing
with edges of holes aligned. Mark cutting line on blower housing along outer edge of template (dashed line in illustration).
NOTE: Line must be marked out straight past, not around hose branch.
15. Remove template and cut housing. Use motorized jigsaw or hacksaw blade to cut along marked-out line.
NOTE: Cutout section is referred to as reinforcing piece in text below. Reinforcing piece must be used to reinforce motor mounting in new
blower housing when original blower motor is installed.