780 V6-2849cc 2.8L SOHC B280F (1987)
AM13. Reinstall brake caliper
Use new bolts. Tighten bolts to 100 Nm (74 ft. lbs.).
AM14. Refit wheels as per markings
Finger-tighten nuts, then torque diagonally to 85 Nm (63 ft. lbs.).
Sensor Wheel, Replacement (Integral Hub and Disc)
FRONT SENSOR WHEEL, REPLACEMENT (INTEGRAL HUB AND DISC)
Special tools: 999 1801, 2722, 5005, 5009, 5276
AL1. Jack up and support rear of car. Remove wheel
Place support stands under jacking points.
Mark wheel position if locating studs are not fitted.
AL2. Remove brake caliper
Remove both mounting bolts and lift off caliper. Tie up caliper to prevent damage to hose.
AL3. Remove brake disc