780 V6-2849cc 2.8L SOHC B280F (1987)
Windshield Washer Motor: Service and Repair
Front Washer Motor
H1
Windshield Washer Motor, Replacement
- Unplug connector.
- Lift out motor.
- Disconnect hose.
- Before replacing pump, try out motor with reversed 12V polarity to loosen any dirt blocking the pump.
- Reassemble in reverse order.
- Plug in connector and reinstall hose.
- Fit pump:
‹› Before fitting pump, immerse inlet pipe in plain or soapy water to avoid compressing rubber seal.
- Fill washer reservoir with fluid and check for leaks.
- Test pump