850 L5-2.3L Turbo VIN 57 B5234FT (1994)
Left-hand side:
-
Hold clip.
-
Remove nail (drill bit) quickly and keep hands clear.
-
Release roller spring tension.
-
Tap out roll pin and remove clip.
-
Install new clip and secure with pin. Installation of roll pin can be assisted by chamfering one end with file.
Right-hand side:
-
Tap out roll pin and remove clip. Install new clip and secure with pin.
A5
Tension roller spring
Seen from left-hand-side:
-
Roll cover clockwise.
-
Wind up spring 16 turns clockwise using flat blade or other suitable light tool.
-
Lock with nail (or drill bit). Check that nail/bit is inserted as far as possible.
A6