850 L5-2.3L Turbo VIN 57 B5234FT (1994)
-
Install dirt guard in groove inside cylinder and push piston in carefully.
-
Check that dirt guard slots into its groove in the piston.
-
Check that dirt guard is in position properly.
-
Install bleed nipple (5), tighten to 9 Nm (7 ft.lb).
Finishing [KC11]
-
Install rubber bushings in brake caliper.
-
Screw brake caliper onto hose by hand.
-
Hang brake caliper up on a steel wire on front spring to avoid damaging hose. Go to KA5. See: Brake Pad/Service and Repair