850 L5-2.3L Turbo VIN 57 B5234FT (1994)
-
install control module connector.
-
Install air filler casing.
Turbo models:
-
Install inlet pipe between air filter casing and turbocharger.
Finishing [ND13]
-
install battery negative lead.
-
Bleed brake system as per LK. Bleeding brakes. Then continue as below.
-
Clean off any spilled brake fluid with lukewarm water and car wash shampoo.
Operational checks [NE14]
-
Read off any DTCs posted in control module and erase them.
-
Quit DTM by switching off ignition.
-
Test drive car, check that brakes work and that ABS warning indicator goes out.
-
Read off DTCs and check that code 1-1-1 appears.
-
Quit DTM by switching off ignition.
