850 L5-2.3L Turbo VIN 57 B5234FT (1994)
-
Screw down adjustment screw so that the contact plate is in contact with the fuel rail, turn the screw another half turn.
The Figure shows clamp 999 5620-3 positioned closest to the fuel pressure line (late fuel rail).
Remove:
-
Vacuum hose from pressure regulator.
-
Screws holding fuel rail.
-
Lift the fuel rail twisting it carefully. Hook the middle injector behind the drainage gully seal.
Note:
Handle injectors carefully to avoid damage to nozzles and needles.
Keep any damping rubbers on the intake manifold.
Removing Engine Cooling Fan (FC)
Remove:
