850 L5-2.3L Turbo VIN 57 B5234FT (1994)
Install starter motor bracket
Reinstalling Engine Cooling Fan (FC)
Install:
-
Engine cooling fan (FC) with shroud on the radiator. Position the air guide with the relay on the radiator.
-
Secure the cable in the tie strap and the clip on the engine cooling fan (FC) shroud.
Install:
-
EVAP valve on the engine cooling fan (FC) shroud.
-
Two clips around EVAP hose on engine cooling fan (FC) shroud.
-
Charge air pipe between the charge air cooler (CAC) and hose on the throttle body.
-
Slide the EGR converter into the track in the upper air guide and check that it is secure.