850 L5-2.4L VIN 55 B5254S (1993)
Wheel Speed Sensor: Service and Repair
Front Wheel Sensor, Replacement [NA]
Special tool(s): 1158147 torque socket
Preparations [NA1]
-
Ignition off.
-
Remove wheel.
Removing sensor [NA2]
NOTE: Clean sensor and connector carefully before removing them.
-
Remove sensor mounting bolt and pull sensor out.
-
Remove connector.
Installing sensor [NA3]
-
Clean sensor seat free of dust and rust so sensor ends up in right position relative to pulse wheel.
-
Brush any dirt off of pulse wheel. Use a soft brush.
[NA4]
-
Install sensor and tighten bolt to 10 Nm (7.5 ft.lb).
-
Install connector.
Installing wheel [NA5]