850 L5-2.4L VIN 55 B5254S (1993)
-
Check that brake disc and rim contact surfaces are clean.
-
Grease hub center rim guide with anti-rust agent 1161038-3.
-
Install wheel.
-
Install bolts hand tight. Then tighten them across to 110 Nm (80 n.lb). If tightening with nut runner, use torque socket 1158147.
NOTE: The star pattern tightening and torque settings are important to prevent stresses arising in the brake disc.
Operational checks [NB6]
-
Read off any DTCs posted in control module and erase them.
-
Quit DTM by switching off ignition.
-
Test-drive car and check that ABS warning indicator goes out.
-
Read off DTCs and check that code 1-1-1 appears.
-
Quit DTM by switching off ignition.
