850 L5-2.4L VIN 55 B5254S (1993)
-
Install washer reservoir filler pipe.
-
Install front air duct to control module box.
-
Check that filler pipe seals flush to washer reservoir.
-
Install washer hose and wiper arm.
NOTE: Before installing wiper arm, check that motor has returned to the off position and that the washer hose is not being pinched.
-
Install nut hand tight.
-
Adjust position of wiper arm: blade should be directly underneath stop when tightening. Torque setting 4 Nm (3 ft.lbf).
-
Lift wiper arm over stop.
-
Test headlight wipers.
