volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

External Mast Antenna - Installation|Page 6615 > < External Mast Antenna - Installation|Page 6613
Page 4
background image

Repair kit p/n: 1161441-9

Note:

The antenna cannot be repaired if the break in the loop is wider than 2 mm. In this case, the window must be replaced as described in TP 32395/2.

B1

Determine exact position of break, either by visual inspection or with the aid of an ohmmeter.

B2

Carefully clean each broken end of loop conductor by scraping with knife tip. Clean area of repair with window cleaner.

B3

Position slitted mask over conductor. If conductor is thinner than slit, cut mask and adjust width of slit to suit.

B4
Note:

Shake compound container thoroughly prior to use. Use thinner to clean.

External Mast Antenna - Installation|Page 6615 > < External Mast Antenna - Installation|Page 6613