volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Resetting Anti-Theft Radio|Page 6900 > < Diagram Information and Instructions|Page 6897
Page 1
background image

Radio/Stereo: Service and Repair
Resetting Anti-Theft Radio

Anti-theft Code

The radio features anti-theft circuitry. If the set is removed from the vehicle or if the battery power is disconnected, a special code must be entered to
enable operation of the set.

Refer to the radio code card supplied with your vehicle or ask your dealer for the correct code.

When the car is parked with ignition key removed the anti-theft LED will flash.

To Enter The Code

After installation or when the set has been disconnected from power, the set displays "codE" when it is switched on. Enter the 4-digit code using the
preset buttons. If the correct code is entered the set is ready to use.

If you enter an incorrect code you must enter the correct code again from the beginning.

Incorrect Code

If an incorrect code has been entered "EEEE" is displayed. Enter the correct code. After three unsuccessful coding attempts the set will lock and remain
locked for two hours. "OFF" is displayed.

During this waiting period:
-

the battery must be connected.

-

the ignition key must be turned to position I.

-

the unit must be turned on.

Make sure the headlights are turned off to help prevent battery drain.

Enter the code again once this time has elapsed.

Resetting Anti-Theft Radio|Page 6900 > < Diagram Information and Instructions|Page 6897