850 T-5R L5-2.3L Turbo VIN 58 B5234T5 (1995)
-
the drill chuck with a piece fuel hose (A).
-
the paint by installing a piece plastic hose (B) on the drill bit.
Drill a guide hole 3 mm (1/8") through the clip side molding rear hole on the front door.
Install a panel between door inner and outer panels to protect the door outer panel.
Make a hole 16 mm (5/8") with hole saw.
File down any burrs.
After-treatment
Prime modified surfaces according to Service Manual:
TP 8102201
Section 8(80)
Paintwork repairs
850 1995-
section C1
