volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Door Lock Switch - Replacement|Page 7561 > < Door Lock Switch - Replacement|Page 7559
Page 4
background image

-

alarm switch (A). Discard holder (B) if it is of the fusible locking type. Also see above Note.

-

one lead at a time. Solder each lead to corresponding terminal pin on new switch (C) as illustrated.

Install:

-

new alarm switch (C) in plastic holder and in lock as described in Section B.

Reinstall:

lock cover. Reinstall lock in door as described in Section E.

D
REPLACEMENT OF INTERIOR/COURTESY LIGHT SWITCH

Remove/disconnect:

-

switch (A) from lock unit by carefully prying catches aside and lifting switch straight away from guide pins (B), which engage in small holes in side
of switch.

-

one lead at a time. Solder each lead to corresponding terminal pin on new switch (C).

Install:

-

new switch (C) in clip in lock unit.

Reinstall:

Door Lock Switch - Replacement|Page 7561 > < Door Lock Switch - Replacement|Page 7559