850 T-5R L5-2.3L Turbo VIN 58 B5234T5 (1995)
-
Grind weld down, but not so that it weakens the strength of the weld.
USE PRIMER ON THE BRACKET
-
First apply anti-corrosion paint, then graphite grey topcoat
REINSTALL STRIKER WITH RUBBER STOP
-
Adjust lock striker as far as possible inward but not so far that excessive force is required to close the tailgate.
ADJUST TAILGATE
-
Adjust tailgate as per SB 8-84-811
NOTE!
The tailgate can be located max. 4 mm (5/32") inside the lower edge of the rear light clusters and never outside the edge. (Normally the tailgate
should be in line with the lamp clusters.)
Install rocker panel (door sill) molding
Apply grease P/N 1161246-2 (50 g. tube) on:
- Rubber bumps
- Striker plate side catches and the striker locking catch
