850 T-5R L5-2.3L Turbo VIN 58 B5234T5 (1995)
Remove:
-
seal (1) from rail front end.
-
side trim (2) from rail outer side.
Note:
If all the side trim is bonded the adhesive should be removed carefully.
-
end fitting (3) from rail rear end.
-
holders (4) (4 holders) carefully, (they will be used again).
-
Install the new side trim. Hook up under rail and press down over the rail side.
-
Adjust trim lengthways so the cut-out in the trim is positioned In the middle of the rail central stay.
-
Bond 5 mm (3/16") of surface in cut-out ends.