850 T-5R L5-2.3L Turbo VIN 58 B5234T5 (1995)
Sunroof / Moonroof Weatherstrip: Testing and Inspection
Checking seal
If work has been carried out on the sun root mechanism that could affect its seal, it should be tested. This is best carried out with the headlining removed.
Check seal by pouring water into the sun roof base plate. During the test the drain hoses must be sealed.
The rear drain hoses are inside the side panels in the cargo compartment and can be sealed by clamping them with welding grips.
The front drain hoses are difficult to access and can be sealed by applying sealant to the sun roof base plate front drain.
Do not forget to remove the sealant after the test.
After work when the sunroof base plate has been removed the following test is carried out.
1 Test the front and rear edge gutter sealing on the sun roof base plate by pouring water in before installing in the car.
2. Install the sun roof base plate in the car and connect the drain hoses.
3. Check that all seals are intact. Install other components. If necessary install new seals according to Seal Replacement.
4. Seal drains as above.
5. Pour water into sunroof base plate. Check for leaks.
6. Remove drain hose seals.
7. Check that the drain hoses work.
