volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Motor M1 and M3, Replace|Page 7862 > < Motor M1 and M3, Replace|Page 7860
Page 1
background image

Power Seat Motor: Service and Repair
Motor M2 In Backrest, Replace

Motor M2 in backrest, replace 

Remove: 

-

Deactivate the mechanical belt tensioner.  See: Service and Repair/With Power Seat/Deactivating/Activating the Mechanical Belt Tensioner

-

Battery negative cable

-

Seat from car.  See: Service and Repair/With Power Seat/Complete Seat, Replace

-

Seat trim.  See: Service and Repair/With Power Seat/Trim, Backrest, Replace

-

Impact protection.

-

Motor connector (grey) from control module

-

Straps holding cable from motor.

-

Screw (A) securing motor

-

Screws (B and C) from the wire attachment point.

-

Wire attachment point (D).

 
 

Install: 

In reverse order.

-

Activate the mechanical belt tensioner.  See: Service and Repair/With Power Seat/Deactivating/Activating the Mechanical Belt Tensioner

Motor M1 and M3, Replace|Page 7862 > < Motor M1 and M3, Replace|Page 7860