volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Front Seat|Page 7959 > < Diagram Information and Instructions|Page 7956
Page 1
background image

Seat Heater Thermostat: Testing and Inspection
Front Seat

Use this procedure if Heater is not working, but power supply and ground connection are OK.

-

Turn ignition off.

-

Undo connectors.

-

Remove thermostat and plastic mount from seat.

-

Remove thermostat from connector.

-

Connect an ammeter in place of thermostat and turn Ignition on.

-

Ammeter should read at least 4A.

If reading is correct:
-

Fault is in thermostat. 

-

Replace thermostat and try again.

If reading is incorrect:
-

There is an open-circuit in the heater element wiring.

-

Remove cover and replace heater element.

Front Seat|Page 7959 > < Diagram Information and Instructions|Page 7956