850 T-5R L5-2.3L Turbo VIN 58 B5234T5 (1995)
Wheel Speed Sensor: Service and Repair
Rear Wheel Sensor and Connector, Replacement [NB]
Special tool(s): 115 8147 torque socket.
Preparations [NB1]
- Ignition off.
- Remove wheel.
Removing sensor [NB2]
NOTE: Clean sensor and connector carefully before removing them.
-
Remove sensor mounting bolt and remove sensor.
-
Remove connector.
Installing sensor [NB3]
-
Clean sensor seat free of dirt and rust so sensor is in correct position relative to pulse wheel.
-
Brush off any dirt on pulse wheel. Use a soft brush.
[NB4]
-
Install sensor and tighten bolt to 10 Nm (7.5 ft.lb).
-
Install connector.
Installing wheel [NB5]
