850 T-5R L5-2.3L Turbo VIN 58 B5234T5 (1995)
Brake Pad: Technical Service Bulletins
Brake Pads - Resonance Vibrations
SECTION
5
GROUP
51
NO.
803
DATE
Aug. 1996
New shims to minimize resonance vibrations, rear
850
REFERENCE:
TP 5001201, SECTION 5, BRAKES (INCL. ABS AND TRACS); 850 1992-
TP 5002202, SECTION 5 (50, 52, 55, 59) BRAKES (INCL. ABS AND TRACS); 850 1996
New shims to minimize resonance vibrations, rear
If a customer complains of resonant vibrations from the rear of the car when braking at low speed (frequently when the brake discs are hot after repeated
braking), the problem can be fixed by replacing the shims. A kit with a new type of shim has been produced for the rear brake calipers. The kit has P/N
272272-6 (kit contains 4 shims).
(Resonant vibrations are experienced usually when the car has new rear brake discs/pads).
The service manual referred to in this service bulletin is the Service Manual Section 5
Brakes (incl. ABS and TRACS) 850 1992- TP 5001201 or
Brakes (incl. ABS and TRACS) 850 1996- TP 5002202
Method
Before replacing the shims the brake pads must be removed.
Remove rear wheels.