850 T-5R L5-2.3L Turbo VIN 58 B5234T5 (1995)
Brake Hose/Line: Service and Repair
Removal [LA1]
-
Remove brake pipe and hoses.
Note:
Check that brake pipe and hoses are not damaged by plastic mounting to the left on the rear axle when they are removed.
Installing brake pipe [LA2]
-
Install pipe. It may need bending to the right shape.
-
Blow pipe through clean with compressed air.
-
Tighten brake pipe to 14 Nm (10 ft.lb).
Installing brake hoses [LA3]
-
Install hoses. Hoses must not be twisted when in position. Hoses have white lines running along them which show clearly if they are twisted.
-
Tighten brake hoses to 18 Nm (13 ft.lb).
Bleeding [LA4]
-
Bleed braking system as per LK, Bleeding brakes. Now go to LA5. See: Brake Bleeding/Service and Repair
Cleaning [LA5]
Always carry out the following cleaning procedure after overhauling the braking system or installing new parts to remove old brake fluid and dirt.
-
Clean brake pipe by flushing out with clean brake fluid or T-spirit.
-
Blow pipe clean with dry, filtered compressed air.