850 T-5R L5-2.3L Turbo VIN 58 B5234T5 (1995)
Install:
-
complete master cylinder with brake fluid reservoir and tighten nuts.
-
brake pipe, but do not tighten.
NOTE: Do not use soap solution for lubricating hoses. Use brake fluid or glycerine.
Install:
-
hoses on brake fluid reservoir.
-
connector on brake fluid level sensor.
-
battery negative lead.
[LJ5]
-
Fill brake fluid reservoir completely.
-
Tighten pipe nipples to 14 Nm (10 ft.lb) if it seems brake fluid is escaping.
[LJ6]
-
Bleed braking system as per LK. Bleeding brakes. Then continue as per instructions below. See: Brake Bleeding/Service and Repair
-
Bleed clutch in manual models.
Pressure-testing braking system [LJ7]
Once system has been bled, it must be pressure-tested.