850 T-5R L5-2.3L Turbo VIN 58 B5234T5 (1995)
-
Install guide sleeve to cable and install cable end in grip on expander.
-
Pinch grip on expander around cable with a pair of pliers.
-
Install cable guide sleeve to carrier arm end piece with bolt and bracket.
-
Install mounting bolt in front of rear wheel arch.
Later version
Removing cable [MD9]
-
Remove rear wheel.
-
Remove cable clip mounting bolt located in front of rear wheel arch.
-
Remove cable clip and rivet on carrier arm.
-
Undo cable from carrier arm end piece by bending cable cover guide sleeve up and down moderately.
-
Remove cable rear end from grip on expander.
-
Remove cable.
Installing cable [MD10]
-
Insert new cable through floor from outside.
-
Install cable front end in parking brake mechanism.
[MD11]
-
Check that 0-ring on cable cover guide sleeve is OK.