850 T-5R L5-2.3L Turbo VIN 58 B5234T5 (1995)
-
Check that brake disc and rim contact surfaces are clean
-
Grease hub center guide for rim with anti-rust agent 1161038-3.
-
Install wheel.
-
Install bolts hand tight. Then tighten them in star pattern to 110 Nm (80 ft.lb). If tightening with nut runner, use torque socket 1158147.
NOTE: Tightening bolts in star pattern to specific torque settings is important to prevent stresses in the brake disc.
Operational checks [NA6]
-
Read off any DTCs posted in control module and erase them.
-
Quit DTM by switching off ignition.
-
Test-drive car and check that ABS warning indicator goes out.
-
Read off DTCs and check that DTC 1-1-1 appears.
-
Quit DTM by switching off ignition.