850 T-5R L5-2.3L Turbo VIN 58 B5234T5 (1995)
Radiator: Service and Repair
Special Tool:
-
Pressure Tester tool No. 998 5496, or equivalent
NOTE: For additional information on special tools and equipment used in this procedure, refer to Service and Repair. See: Engine/Tools and
Equipment/Tools For Engine Service and Repair
Procedures
-
Radiator, replacement: steps 1 through 9
-
Engine coolant-temperature (ECT) sensor: step 10
Cooling System, Check For Leaks
Test pressure of cooling system
-
Use pressure tester 998 5496.
-
Connect tester to expansion tank cap.
-
Pump up pressure and check for leaks.
pressure should be 150 kPa (22.5 psi).
pressure in the system should be stable.
NOTE: Allow the pressure to stabilize for a few minutes.
1. Drain coolant:
-
Remove expansion tank cap.