850 T-5R L5-2.3L Turbo VIN 58 B5234T5 (1995)
Lifter / Lash Adjuster: Service and Repair
REMOVE AND INSTALL VALVE LIFTERS
-
Remove camshafts. Refer to "Cylinder Head and/or Gasket Replacement" See: Cylinder Head Assembly/Service and Repair
-
Remove tappets from cylinder head:
-
Use a magnet or suction cup to assist in removing tappets.
-
Check tappets for signs of wear.
Measure if necessary.
NOTES:
-
Keep tappets stored upright to prevent oil from draining.
-
Lay tappets in order: Do not mix them up.
-
If storing for any length of time, put tappets in an oil-filled container.