850 T-5R L5-2.3L Turbo VIN 58 B5234T5 (1995)
Piston: Service and Repair
Crank, Pistons and Rods, Measurement
Special Tools:
-
Counterhold tool No. 999 2413, or equivalent
-
Drift tool No. 999 5309, or equivalent
-
Magnetic Stand tool No. 999 9696, or equivalent
-
Dial Gauge tool No. 999 9684, or equivalent
-
Micrometer tool No. 999 9701, or equivalent
-
Micrometer tool No. 999 9702, or equivalent
-
Micrometer tool No. 999 9703, or equivalent
-
Micrometer tool No. 999 9704, or equivalent
Universal Tools:
-
tool No. 998 5424, or equivalent
NOTE:
-
For additional information on special tools and equipment used in this procedure, refer to "Tools For Engine Reconditioning". See: Tools and
Equipment
-
Crank mechanism, measurement: Steps 1 through 12
-
Connecting Rods bushings, replacement: Steps 13 through 16
-
Connecting Rods, replacement: Step 17
Procedure
1. Measure crankshaft:
-
Use micrometer tool No. 999 9703.
-
Measure out-of-round and ovality of bearing journals.
-
Take readings at several points around circumference and along length.
2. Crank pins:
-
Diameter:
Standard: 50.000 mm +0 or -0.016
Undersize: 49.750 mm
-
Bearing Seat Width: 26.000 mm ± 0.1
-
Max. Out-of-round: 0.004 mm
-
Max. Taper: 0.004 mm
Main bearing journals:
-
Diameter: